6082 Aluminum Rod
6082 Aluminum Rod is an aluminum-magnesium-silicon alloy that can be heat-treatable and strengthened. It is generally of medium to high strength, with significantly better mechanical properties than 6061 aluminum rods, making it a common choice for heavy-duty structural components. However, its performance varies considerably depending on the heat treatment state.
Standard Mechanical Properties in Different State
|
Supply Status |
Tensile strength: |
Yield strength: |
Elongation |
Brinell Hardness |
Performance Characteristics & Applicable Scenarios |
|
O (Annealed Soft State) |
170~190 |
70~90 |
≥20 |
40~50 |
Lowest strength, excellent plasticity, suitable for bending, stamping and other deformation processing. |
|
T4 (Solution-Aged Naturally) |
250~270 |
140~160 |
≥15 |
65~75 |
Medium strength, good plasticity, balancing forming and foundation load-bearing. |
|
T5 (Extrusion-Aged Air-Cooled) |
280~300 |
230~250 |
≥10 |
80~90 |
Moderate strength, less commonly used in bar stock, mostly used for extruded profiles. |
|
T6 (Solution-Aged Artificially, Main State) |
≥310 |
≥260 |
≥10 |
≥95 |
Highest overall strength, good rigidity, strong resistance to deformation, preferred for general load-bearing structures. |
|
T651 (Stress-Relieved T6) |
Basically consistent with T6 |
Basically consistent with T6 |
≥9 |
94~98 |
Strength close to T6, extremely low residual stress, not easily deformed during processing, suitable for precision machined parts. |
Concerns: Difficulty distinguishing between 6082 and 6061, uncertainty about their interchangeability.
Customer Concerns: The two materials look similar, and the strength difference is unclear; there is a risk of choosing the wrong material affecting the structural load-bearing capacity.
Solution: Choose 6082 for heavy-duty, high-stress structures; choose 6061 for general machining, light-load components, and cost control; 6061 should never be used as a substitute for 6082 in high-strength applications.
Concerns about insufficient strength and unstable batch performance.
Customer Concerns: Primarily using high-strength structural materials; there is a risk of manufacturers cutting corners in heat treatment, leading to easy deformation under stress.
Solution: Prioritize T6/T651 standard conditions; request material certificates and mechanical data for each batch; obtain small samples for hardness testing before large orders.
Hot Tags: 6082 Aluminum Rod, China, Manufacturer, Supplier, Factory
Related Category
Send Inquiry
Contact Info
-
Address
Hanyu Jingu, High-tech Zone, Jinan City, Shandong Province, China
-
Tel
-
E-mail
For inquiries about Carbon Steel, Stainless Steel, Galvanized Steel or price list, please leave your email to us and we will be in touch within 24 hours.
