Products

Anodized Aluminum Tube is a commonly used aluminum tube product with excellent surface protection and decorative performance. The anodizing process uses the aluminum tube as the anode and places it in a sulfuric acid electrolyte, applying direct current to form a dense aluminum oxide layer on the surface. Compared with painting or electrophoresis, the oxide film of this product is integrally bonded with the aluminum substrate and will not peel off, providing stable corrosion resistance and durability.

5A06 aluminum tube is an aluminum-magnesium (Al-Mg) rust-resistant aluminum alloy tube widely used in industrial fields due to its excellent comprehensive performance.

2A12 Aluminum Tube is a high-strength hard aluminum alloy tubing, belonging to the aluminum-copper-magnesium alloy family, corresponding to the international grade LY12. Its excellent comprehensive performance makes it widely used in aerospace, machinery manufacturing, and other fields, earning it the nickname "flying metal." The following are its main characteristics and advantages:

Suppliers of 6082 aluminum tubes primarily offer round tubes with outer diameters ranging from φ10–φ250mm and wall thicknesses from 2–25mm. The mainstream supply formats are T6 and T651, with a standard length of 6 meters. Custom cutting to length and non-standard specifications are also supported.

5754 Aluminum Tube belongs to the aluminum-magnesium alloy family for rust prevention. It is a medium-strength, corrosion-resistant grade of 5-series pipes with balanced performance. The magnesium content is controlled between 2.6% and 3.6%, and it cannot be heat-treated for strengthening. With its high cost-performance ratio—superior strength to 5052 and lower cost than 5083—it is widely used in automotive lightweighting, marine components, and corrosion-resistant pipelines.

5052 aluminum tube manufacturers offer round, square, and rectangular tubes. Round tubes range from φ6–φ200mm in outer diameter and 1–20mm in wall thickness. The mainstream supply states are O, H112, and H32, with a standard length of 6 meters. Custom cutting and non-standard customization are also supported.