6063 Aluminum Coil
6063 Aluminum Coils is a 6-series aluminum-magnesium-silicon alloy, easy to bend and process, aesthetically pleasing after anodizing, and possesses good corrosion resistance and toughness. Chinese suppliers offer a complete range of specifications, providing high cost-effectiveness. It is suitable for building decoration and various light industrial materials.
6063 aluminum coil is an Al-Mg-Si series heat-treatable aluminum alloy coil (a classic 6-series grade), known for its low alloying, high plasticity, and excellent surface treatment properties. The core strengthening phase is Mg₂Si, and strength can be increased through heat treatment while maintaining good formability and weldability.
Specifications
|
Specifications |
Standard range: 0.1mm~10mm (cold-rolled) |
Customization range: |
Notes: |
|
Thickness |
0.1mm~10mm(Cold rolling) |
0.05mm~150mm |
Ultra-thin/ultra-thick requires special customization |
|
Width |
500mm~2650mm |
100mm~3000mm |
Ultra-wide requires large rolling mill production |
|
Length |
Custom coil weight (common 1~10 tons) |
Custom sizes available upon request |
Can be slit to any length |
|
Inner Diameter |
505mm/610mm (standard) |
300mm~800mm |
Compatible with different uncoiling equipment |
|
Roll Diameter |
≤2000mm |
≤2500mm |
Subject to equipment and transportation limitations |
|
Status |
0 (annealed), T4, T5, T6, T651 |
Special aging conditions can be customized |
T6 is the commonly used high-strength condition |
Comparison Table of Mechanical Properties of 6063 Aluminum Coil in Different States
|
State |
T4 |
T5 |
T6 |
T651 |
|
Tensile Strength (MPa) |
≥205 |
≥220 |
≥240 |
≥240 |
|
Yield Strength (MPa) |
≥110 |
≥160 |
≥205 |
≥205 |
|
Elongation (%) |
≥16 |
≥12 |
≥10 |
≥10 |
|
Webster Hardness |
Medium |
Slightly hard |
Slightly high |
Same as T6 |
|
Key Features |
Good plasticity, easy to stretch and bend, relatively low strength |
Decent formability, moderate strength, high cost performance |
Highest strength, sufficient rigidity, slightly poorer formability |
Relieves internal stress, prevents deformation during cutting |
|
Applicable Scenarios |
Suitable for complex stretching parts, bending decorative parts |
Architectural doors and windows, general decorative profiles |
Strength-bearing supports, heat sinks, structural panels |
Precision machining, high-precision sheet metal |
Hot Tags: 6063 Aluminum Coil, China, Manufacturer, Supplier, Factory
Related Category
Send Inquiry
Contact Info
-
Address
Hanyu Jingu, High-tech Zone, Jinan City, Shandong Province, China
-
Tel
-
E-mail
For inquiries about Carbon Steel, Stainless Steel, Galvanized Steel or price list, please leave your email to us and we will be in touch within 24 hours.
